With the same DPI and default yaw settings, multiply Valorant hipfire sensitivity by about 3.181818 to match physical turn distance in CS2. This is a starting point, not a promise that both games will feel identical.
CS2 sensitivity = Valorant sensitivity × (0.07 ÷ 0.022)
For example, 0.3 becomes about 0.9545 at unchanged DPI. The ratio comes from the games’ default yaw constants; see the manual conversion method.
Multiply that result by Valorant DPI ÷ CS2 DPI. For example, 0.3 at 800 DPI becomes about 1.9091 at 400 DPI in CS2. Confirm the mouse profile actually uses the intended DPI.
Make one small adjustment at a time if you prefer a different feel.
Field of view, scope behaviour and visual presentation affect perception. Hipfire conversion does not automatically solve zoom or ADS settings. Compare eDPI within a game; matching the raw eDPI number across these two games skips the yaw difference.
Read our CS2 sensitivity guide and crosshair setup guide. Keep a note of your original settings so changes are reversible.
At unchanged DPI and default yaw, multiply Valorant hipfire sensitivity by about 3.181818.
At unchanged DPI it becomes about 0.9545 in CS2.
Multiply the converted sensitivity by the old Valorant DPI divided by the new CS2 DPI.
It is about 1.9091, assuming default yaw settings.
Not necessarily. Equal physical turn distance does not remove differences in field of view and visual presentation.
No. Check scoped or ADS behaviour separately.
No. The different yaw constants mean equal raw eDPI numbers do not represent equal turn distance.
Compare the physical mouse distance needed for a full turn in each game.